Ai Power Sgo Automatic Inflator for Inflatable Life Jacket

• Conditions of Use: Marine
• Usage: Emergency Crew
• Output Type: AC Single Phase
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: AT
• Cooling Method: Oil Cooling
• Installation Method: Portable
• Generator Type: Emergency
• Warranty: 1 Year
• Color: Grayyellow/Black
• Inflation Mode: Manual/Automatic
• Material: Plastic
• Certificate: ISO9001, CCS
• Transport Package: Carton.
• Specification: 0.2CBM
• Trademark: Ai Power
• Origin: Fujian, China
• HS Code: 8502120000
• Production Capacity: 1000 Set/Sets Per Month

Product Description

Product Description

Ai power SGO Automatic Inflator For Inflatable Life Jacket

The inflator is a trigger device with water-sensitive fiber, which is mainly used to form an automatic charging system with automatic valves. Compared with the traditional triggering inflator, it is characterized by fast starting and strong power at low temperature. The inflator can be triggering within 2 to 4 seconds in a low temperature environment, and stable operation under high temperature, low temperature, high temperature and high humidity conditions. The inflator contains a powerful firing spring that provides 40% to 60% greater piercing energy than standard, improving the piercing success rate for cylinders of all sizes. Once the trigger is flooded, the water sensitive ring ruptured and released the firing rod will strike the automatic valve push rod forward, pushing the needle to Pierce the carbon dioxide cylinder. The carbon dioxide gas in the cylinder immediately passes through the automatic valve to inflate the inflating equipment.

Specification

Triggering Time	2-4 seconds
Moisture Resistance	≥168 hours (temperature 49±2/ relative humidity 96%)
Trggering Water	Fresh/Sea water
Operating Temperature	-30 to +60
Storage Time	3 years
Service Life	1 year (non-extreme environment)
Executive Standard	ISO 12402-7:2007
Inflation Mode	Manual/Automatic
Materil	Plastic
Color	GrayYellow/Black
Weight	0.2kg

Packing & Delivery

Matters Need Attention

1, no matter when it is enabled, the use of the trigger can not exceed the storage period, overdue timely replacement. 2, trigger in extreme (high temperature and humidity) environment, must shorten the service life, increase the frequency of replacement. 3, the automatic valve (trigger) should be stored in a clean, dry, ventilated and temperature 0 ~ 30, relative humidity 40% ~ 60% environment. 4, when the trigger is removed from the storage environment or installed on the automatic valve to calculate the service life. 5. After the inflating equipment is used, do not store it in high temperature, high humidity and no air circulation environment (such as car trunk, closed locker, etc.) to avoid trigger error. 6, after triggering into the water, please replace the new trigger in time. The trigger is disposable and cannot be reused. It can only be replaced. 7, the trigger tail has a status indicator, indicating that the green represents the effective state. Red indicates failure and requires immediate replacement. 8. This product implements civilian standards and cannot be used for  purposes. If you need standard products, please contact us. 9, if the matching automatic valve or gas cylinder does not meet the requirements of ISO 12402-7:2007 standard, resulting in no puncture or small puncture opening, and other performance failures, we do not assume any responsibility for this. 

Product Paramenters

Company Profile

 

Xiamen Ai Power Technology Co.,Ltd, which is located in the beautiful tourism city of Xiamen city, Fujian Province, It is dedicated to becoming a comprehensive company for intelligent power and green energy supply.Our company aim to create a better life for the world by supplying better power solutions. Continually improving products' quality, friendly-use and durability is our long-term mission. We will make all the efforts to walk a long way to reach customers' greatest satisfaction.

FAQ

1.What's your warranty?
Answer: 1 year.

2.Can you use our logo?
Answer: Yes, we can use customer's logo instead of ours.

3. Can you accept small order?
Answer: Yes, we can accept trial order.

4. What's your delivery time?
Answer: Our normal delivery time is 1-2 weeks, and we also have some units on stock.

Contact Us

Mr.Jacky Zhou
Xiamen Ai Power Technology Co., Ltd.
Power System Supplier- Generator Sets, Lighting Tower 
Add: B15 Unit 502, No. 59, Chengyi North Street, Jimei District, Xiamen City, China