| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | 1 Year or 1000 Hours |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Engine | |
| GENERAL ENGINE DATA | |
| Engine manufacturer | Dongfeng Cum mins Engine Co. Ltd |
| Engine brand | Cum mins |
| Engine model | 6BTAA5.9-G12 |
| Engine speed (rpm) | 1500 |
| Engine output(kWm) | |
| Standby Power | 155 |
| Prime Power | 140 |
| Continuous Power | TBD |
| No. of Cylinder | 6 |
| Aspiration | Turbocharged and Charge Air Cooled |
| Bore * Stroke (mm) | 102 * 120 |
| Displacment (litre) | 5.9 |
| Compression Ratio | 17.3:1 |
| Engine Idle Speed (rpm) | 750-850 |
| FUEL SYSTEM | |
| Type Injection System | BYC A/Electronic Governor |
| Fuel Consumption (litre/hour) | |
| 100% prime power | 34 |
| 75% prime power | 26 |
| 50% prime power | 17 |
| 25% prime power | 10 |
| EXHAUST SYSTEM | |
| Maximum Back Pressure (kPa) | 10 |
| Exhaust Gas Temperature (standby/prime power) (°C) | 507/495 |
| Exhaust Gas Flow(standby/prime power) (litre/sec.) | 357/321 |
| Exhaust Pipe Size Normally Acceptable(mm) | 75 |
| AIR INDUCTION SYSTEM | |
| Maximum Intake Air Restriction (kPa) | |
| with Dirty Filter Element | 6.2 |
| with Clean Filter Element | 3.7 |
| Intake Air Flow (standby/prime power) (litre/sec.) | 150/137 |
| LUBRICATION SYSTEM | |
| Oil Pressure (kPa) | |
| Idle Speed | 207 |
| Governed Speed | 345 |
| Maximum Oil Temperature (°C) | 121 |
| Min. required Lube system capacity-sump plus filters (liter) | 16.4 |
| COOLING SYSTEM | |
| Coolant Capacity - Engine Only (liter) | 10 |
| Standard Thermostat Modulating Range (°C) | 82-95 |
| Maxi. Top Tank Temp. for Standby/Prime Power (°C) | 104 / 100 |
| ELECTRICAL SYSTEM | |
| Cranking Motor (Heavy Duty, Positive Engagement) (volt) | 12 |
| Battery Charging System, Negative Ground (ampere) | 63 |
| Minimum Recommended Battery Capacity | |
| -0°F CCA | |
| ALTERNATOR | |
| Alternator manufacturer | Leroy-somer Electro-technique (Fuzhou) Company Ltd. |
| Alternator brand | Leroysomer |
| Alternator model | TAL-A44-J |
| Control system | SHUNT |
| A.V.R. | Included |
| Voltage regulation | ±1.0% |
| Insulation system | Class H |
| Protection | IP23 |
| Rated power factor | 0.8 |
| Winding pitch | Two thirds |
| Winding leads | 6 |
| Frequency (Hz) | 50 |
| Voltage (V) | 400 |
| Phase | 3 |
| Output ratings (kVA/kW) | |
| ----------------Cont.H-40°C | 150/120 |
| ----------------Standby-27°C | 165/132 |
| THF | <2% |
| TIF | <50 |
| Max. overspeed (Rev/Min) | 2250 |
| Bearing | Single |
1.Famous brand engine couple with high quality alternator
2.Large size cooling radiator
3.Heavy duty steel base frame
4.Strong anti-vibration mat
5.Standard free maintenance battery
6.AC alternator for battery charger
7. Heavy-duty air filter, oil filter, water filter
8.Famous brand controller and breaker
9.Optional fuel tank, silent canopy, ATS, synchronization panels.
Xiamen Ai Power Technology Co.,Ltd, which is located in the beautiful tourism city of Xiamen city, Fujian Province.
Ai Power products adopts internationally and domestically reputed high-quality engines and alternators for our industrial diesel generator sets, gas diesel genset, marine generator, movable generator, lighting towers, generator spare parts and other high value-added electrical products, like ATS, synchronization system, transformer, switchgear, etc.
1. Can you accept small order?
A: Yes, we can accept trial order, it is the starting of business. But according to different product the price may be higher as normal quantity.
2. What is your company product range?
A: We are a professional turbocharger supplier, OEM and ODM are welcome.
3. Do you inspect the product? How?
A: Yes, each step of production and finished products will be carried out inspection by QC before shipping.
4. What is your payment terms?
A: T/T 30% advance payment, the balance 70% shall be paid before shipment, L/C at sight.
5. What about your factory production capacity?
A: 200pcs per month.
6.What kind of transactions you can accept.
A: We can accept FOB, CIF, CFR.
Mr.Jacky Zhou
Xiamen Ai Power Technology Co., Ltd.
Power system supplier-Generators, Lighting Tower & Reefer Genset
Add: B15 Unit 502-3, No. 59, Chengyi North Street, Jimei District, Xiamen City, China
){kind=link}